How many yards of fabric do I need for 84 curtains?

Covering an 84-inch window will take two widths of the fabric. Taking the length of 90 inches and multiplying it by 2, gives us 180 inches. This is equal to 15 feet, or 5 yards. In this example, curtains for a window 84 inches wide would need 5 yards of fabric.

How do I calculate how much fabric I need for curtains?

There’s a simple calculation to work out how much curtain fabric you need. First, multiply the track/pole width by your chosen fullness (eg. Pole width 150cm x 2.5 = 375). Next, divide that figure by the fabric width, which is typically 137cm (375 divided by 137 = 2.73).

How much extra fabric do I need for curtains?

Fabric calculations – Most curtains will require somewhere between 1 ½ and 2 ½ times fullness, depending on the heading and look you want to achieve. I always prefer to be generous and use 2 ½ times the width, skimpy curtains don’t look good and you can always use any extra fabric for cushions or tie backs.

How much gather should curtains have?

The actual amount of gather depends on heading styles and personal preference, but as a general rule the width of your curtains should amount to double the width of your track. This is referred to as ‘two times gather’.

How much wider than window should curtains be?

Measure the width of the rod from left to right. A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness.

How many yards of fabric for curtains?

Add 6 inches to your finished curtain length; each panel thus needs 90 inches of fabric length, for a total of 180 inches for both panels. Divide by 36 to get the final yardage (since there’s 36 inches in a yard), in this case, you will need a total of 5 yards to make both panels.

How to calculate yardage for window curtain panels?

Make sure you add 2 or 3 inches to the width of the panels. This is for the hem of the panels (50+2 = 52). If you need two panels of 52 inches each and your fabric is only 38 inches wide, you will have to buy more material to cut and sew to each panel. If your curtain fabric has a repeated design, calculate the distance between the design repeats.

How big should my curtains be for my Window?

A common rule for displaying curtains properly says the curtains finished width should be at least 2 times the width of your window (if not more – sheers can be 3 times the window width) to achieve a look of proper fullness. How much does a yard of fabric cost?

How much fabric do I need for double pleat curtains?

You can use that equation as pinch pleat and double pleat are the same thing. If this size of curtains is not going to have pleats then the calculation is going to be nice and simple. Using the fabric calculator linked to above, you should only need about 196 inches of fabric or about 6 yards.

How many yards of fabric does it take to make a shower curtain?

In most prints or solid colors, a shower curtain will take 5 yards of 45”- or 54”-wide fabric pieced together to make the needed width. If the print has a large repeat, more fabric will be needed to match the design, so check the repeat distance before purchasing yardage.

What is the best material to make curtains?

Vinyl, acrylic, or plastic-coated materials can be used to make heavy curtains. This type of curtain is generally used to block out excessive noise or to soundproof a room. These acoustical drapes can absorb sound and work best when the home has thin walls.

How much fabric do I need to make curtains?

How do you measure fabric for curtains?

You may find it easier to measure specifically for the Inside Mount. Measure from the inside edge of the molding to the opposite inside edge of the molding. Depending on the thickness of the fabric you’re using and how full you want your curtains, you can determine the width of fabric necessary for your curtains.

How many yards of fabric do I need for 84 curtains?